Identity (As Used on Label and List):	Distributor’s Product:
Java Crowns Temporary Crowns	Items# 1000 through 5000: Rev Oct 11, 2004

SECTION I - PRODUCT IDENTIFICATION AND USE
Distributor’s Name:	Information Telephone Number:
JAVA Crowns	1-800-322-5282
Address (Number, Street, City, State Zip Code, and Country):	Emergency Telephone Number:
6111 FM 1960 West, Suite 215 Houston TX 77069	1-800-322-5282

Section II – Ingredients

Ingredient C.A.S. No. % by Wt.

Powder Coating (Food Grade) Mixture 1

Aluminum Alloy Mixture 99

Product Use: Limitations on Use: For use only by dental professionals

Specific Use: Dental crowns

SECTION III – hazards identification

3.1 EMERGENCY OVERVIEW

Odor, Color, Grade: Odorless, white or gold

General physical Form: Solid

Immediate health, physical, and environmental hazards: This product, when used under reasonable conditions and in accordance with the JAVA Crown Directions for use, should not present a health hazard. However, use or processing of the product in a manner not in accordance with the product’s directions for use may affect the performance of the product and may present potential health and safety hazards.

3.2 POTENTIAL HEALTH EFFECTS

Eye Contact:

No health effects are expected.

Skin Contact:

No health effects are expected.

Inhalation:

No health effects are expected.

Ingestion:

No health effects are expected.

SECTION IV – First aid measures

4.1 FIRST AID PROCEDURES

The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed.

Eye Contact: No need for first aid anticipated.

Skin Contact: No need for first aid is anticipated.

Inhalation: No need for first aid is anticipated

If Swallowed: No need for first aid is anticipated.

SECTION V – Fire Fighting measures

5.1 FLAMMABLE PROPERTIES

Autoignition temperature Not Applicable

Flash Point Not Applicable

Flammable Limits-LEL Not Applicable

Flammable Limits-UEL Not Applicable

5.2 EXTINGUISHING MEDIA

Use fire extinguishers with class B extinguishing agents(e.g. dry chemical, carbon dioxide). Material will not burn,

5.3 PROTECTION OF FIRE FIGHTERS

Special Fire Fighting Procedures: Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head.

Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are anticipated.

Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information.

SECTION Vi – Accidental Release Measures

Accidental Release Measures: Not applicable

SECTION ViI-Handling and storage

7.1 HANDLING

This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under normal use conditions.

7.2 STORAGE

Not applicable.

SECTION ViII-Exposure control/personal protection

8.1 ENGINEERING CONTROLS

Not applicable

8.2 PERSONAL PROTECTIVE EQUIPMENT(PPE)

8.2.1 Eye/Face Protection Not Applicable

8.2.2 Skin Protection Not Applicable

8.2.3 Respiratory Protection Not Applicable

8.2.4 Prevention of Swallowing Not Applicable

8.3 Exposure Guidelines None Established

SECTION iX –Physical and chemical properties

Odor, Color, Grade Odorless, white or gold

General Physical Form: Solid

Autoignition temperature Not applicable

Flash Point Not applicable

Flammable limits-LEL Not applicable

Flammable limits-UEL Not applicable

Boiling Point Not applicable

Density No data available

Vapor density Not applicable

Vapor pressure Not applicable

Specific Gravity Not applicable

pH Not applicable

Melting point No data available

Solubility in Water Nil

Evaporation rate Not applicable

Volatile Organic Compounds Not applicable

Percent volatile Not applicable

VOC Less H2O & Exempt Solvents Not applicable

Viscosity Not applicable

SECTION X-Stability and reactivity

Stability: Stable

Materials and Conditions to Avoid: None known

Hazardous Polymerization: Hazardous polymerization will not occur.

Hazardous Decomposition or By-Products

Substance Condition

None known During Combustion

SECTION Xi-Toxicology Information

Please contact address listed on the first page of the MSDS for Toxicological Information on this material and/or its components.

SECTION XII-Ecological Information

ECOTOXICOLOGICAL INFORMATION

Not applicable

CHEMICAL FATE INFORMATION

Not applicable

SECTION XIII- Disposal Considerations

Waste Disposal Method: Dispose of waste product in a sanitary landfill.

EPA Hazardous Waste Number (RCRA): Not regulated

Since regulations vary, consult applicable regulations or authorities before disposal.

SECTION Xiv-Transport

Please contact the emergency numbers listed on the first page of the MSDS for the Transportation Information for this material.

SECTION XV-Regulatory Information

US Federal Regulations

Contact Java Crowns for more information

311/312 Hazard Categories:

Fire Hazard – NO Pressure Hazard – NO Reactivity Hazard- NO

Immediate Hazard – NO Delayed Hazard – NO

State Regulations

Contact Java Crowns for more information

Chemical Inventories

This material contains one or more substances not listed on the TSCA Inventory. Commercial use of this material is regulated by the FDA.

Contact Java Crowns for more information.

International Regulations

Contact 3M for more information.

This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.

SECTION XVI-other information

NFPA Hazard Classification

Health: 0 Flammability ) Reactivity: 0 Special Hazards: None

National Fire Protection Association(NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.

Disclaimer: The information in the Material Safety Data Sheet(MSDS) is believed to be correct as of the date issued. JAVA Crowns makes no warranties, expressed or implied, including, but not limited to, any implied warranty or merchantability or fitness fro a particular purpose or course of performance or usage of trade. User is responsible for determining whether the JAVA Crown product is fit for a particular purpose and suitable for user’s method of use or application. Given the variety of factors that can affect the use and application of a Java Crown product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the Java Crown product to determine whether it is fit for a particular purpose and suitable for user’s method of use or application.

Java Crowns provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, Java Crowns makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available from Java Crowns.